The difference between micro DC geared motor and ordinary motor

Micro DC geared motors are also called geared geared motors and geared motors. Compared with ordinary micro DC motors, geared motors have lower speed and higher output torque, which is a very obvious difference between the two.

In practical applications, the miniature DC geared motor has high overload capacity, large output torque and superior performance, so it is widely used in various electric products. Ordinary micro motors have no deceleration function. Its output speed is high, but its output torque is low. In some product applications, the speed of micro motors is not high, but the requirements for torque output are high, so ordinary micro motors cannot meet the actual requirements. , which requires adjusting the speed and torque by connecting the gear reducer. Its main role is to generate drive torque.

There are also various types of micro reducers, which can be divided into gear reducers, planetary reducers, worm reducers, spur gear reducers, etc., and the small gear drives the large gear to achieve the purpose of deceleration.

The difference between ordinary micro motors and micro DC geared motors

1. The micro DC geared motor has one more deceleration mechanism than the ordinary micro motor. It is based on the ordinary DC motor, plus the supporting gear reducer. The role of the gear reducer is to provide lower speed and larger torque. . At the same time, different reduction ratios of gearboxes can provide different speeds and torques, which greatly improves the utilization rate of DC motors in the automation industry.

2. The DC geared motor adopts serialization and modular design ideas, has a wide range of adaptability, and has a wide range of applications. However, DC motors generally have high speed and small torque, and are suitable for occasions that require small torque.

The structure of the DC geared motor is very different from that of the ordinary DC motor, and there are also differences in the application occasions. Therefore, the user should choose the appropriate geared motor according to the actual situation and process requirements when purchasing.