What are the functions of the miniature worm gear reducer

Mini worm gear reducer drive central shaft

The commonly used transmission mechanisms for condensers are as follows: (1) Small central transmission thickener. The arm is installed on the central shaft, which is driven by a worm gear reduction mechanism set in the center of the tube bridge, and the stones are cleaned with a safety signal and a manual or electric lifting device. (2) Large-scale central drive concentrator pair roller crusher. The arm is supported by a central truss

Selection and installation of miniature worm gear reducer frame

Worm gear reducer selection. In principle, the rack model is determined based on the diameter of the output shaft of the reducer. As long as the interface form and size match, the output shaft size of the reducer can swing the frame model up and down within a certain range. If you choose to adopt a plate frame, the installation size of the reducer does not match the frame, and the speed can be accelerated within a certain range of our factory

Self-locking function of miniature worm gear reducer

Self-locking means that the worm drives the worm gear, but the worm gear cannot drive the worm. This is because worm gear transmission is realized through friction, and because it is friction transmission, the transmission efficiency is not ideal. This will provide security protection. To realize the self-locking function is conditional, not all worm gear motors have self-locking function, it needs to achieve

Worm gear reduction motor small helical gear wear

Generally occurs in the vertical installation of the reducer, mainly due to the amount of oil added and the choice of lubricating oil. In vertical installation, it is easy to cause insufficient lubricating oil. When the reducer stops running, the transmission oil between the motor and the reducer will be lost. Gears are not properly protected by lubrication and cannot be started during start-up or operation. Lubrication causes mechanical wear and even damage.