What is the typical gear ratio range for gear motors?
Nov 04, 2026
Leave a message
The gear ratio range for gear motors generally falls between 3 and 1800, with significant variations depending on the specific reduction mechanism.
I. Standard Gear Ratio Ranges for Mass-Produced Gear Motors
(I) Parallel-Shaft Gear Motors
1. Hardened-tooth parallel-shaft gear motors: Standard mass-produced models typically feature gear ratios ranging from 3 to 200. Common standardized ratios include 5, 7.5, 10, 15, 20, 30, 50, 100, 200, and similar discrete values.
2. Helical-gear parallel-shaft gear motors: The gear ratio range can extend from 3 to 300; these are frequently used in heavy-duty, continuous-operation applications.
(II) Coaxial Gear Motors
1. The typical gear ratio range is 5 to 500. For small-to-medium power models, ratios generally fall between 10 and 100, while high-power, heavy-duty models typically range from 10 to 200. Some customized models can reach ratios as high as 1800.
(III) Worm Gear Motors
1. Single-stage models typically have gear ratios between 10 and 100, with a maximum single-stage ratio of 150. Two-stage (combined) models can exceed a ratio of 200; however, due to lower transmission efficiency, they are primarily used in low-speed, high-torque applications where installation space is limited.
(IV) Planetary Gear Motors
1. Planetary gear motors designed for servo applications typically feature ratios from 3 to 100. These high-precision units are commonly used in automated production lines and robotic actuators.
2. Heavy-duty planetary gear motors typically feature ratios from 5 to 200 and are capable of withstanding significant radial and axial loads.
II. Gear Ratio Selection for Specialized Applications
1. For low-speed, high-precision transmission applications-such as industrial robot joints or precision inspection equipment-customized gear motors can achieve gear ratios ranging from 1,000 to 5,000.
For high-speed, light-load applications-such as logistics conveyor systems or small-scale fans-gea
Send Inquiry
