DC motor refueling knowledge

In order to ensure the normal use of the DC motor, the step of refueling is essential. Then there are many aspects that need to be understood and mastered when we are refueling. In order to make better use of the machine, let me introduce you to the knowledge of refueling.

1, the method of refueling

There are usually two ways to ensure the number of refueling of the motor. Only a simple and convenient method is introduced. The equipment is placed horizontally, and the drum body is rotated so that the oil discharge port on the end cover is at a height of 1/3 of the diameter of the drum. Fill the oil until the oil drain overflows. At this time, the liquid level in the drum should be 1/3 of the diameter of the drum.

2, DC motor refueling

The refueling amount of this machine is determined according to actual needs. It is concluded that the amount of cooling oil is equal to 1/3 of the diameter of the drum, so that the amount of cooling oil is equal to 1/3 of the diameter of the drum. The amount of oil basically satisfies the cooling of the DC motor motor. Generally, the motor has a volume of 1/4-1/5 immersed in the oil. The lower edge of the transmission gear can be in the oil. After the drum rotates, it can meet the needs of cooling and lubrication.

Through the above introduction, we can clearly understand the refueling method of DC motor and the amount of fuel. I hope that you can master the contents of this article in the future operation, better use the machine equipment, improve the efficiency of the machine, and make us better. Going to work.