The Function And Installation Method Of The Miniature Geared Motor

The functions of the miniature geared motor are as follows: increase torque, change output speed, and adapt to the needs of work. Improve the accuracy of working motors. Change the form of power output and convert it into the required work movement form.

The correct installation method of the miniature geared motor is an effective way to ensure the normal operation of the motor and prolong its service life. Therefore, it is necessary to strictly follow the correct operation method when installing the motor.

The first step is to confirm whether the motor is in good condition before installation, check whether the accessories are complete, whether the circuit is normal, and whether the size meets the requirements.

The second step, when installing, follow the details of the motor in the manual to install step by step, avoid missing important positions, and adjust the output shaft and fixed position of the motor.

Step 3: After the installation is completed, turn on the power to test and run for a period of time. If the current resistance is normal, there is no heat, there are sparks, and there are abnormal conditions, it proves that the installation is correct.

Advantages of miniature geared motors:

1. The micro motor is reliable and durable, has high overload capacity, low energy consumption, superior performance, low vibration, low noise, high energy saving, and low price;

2. The micro motor technology is good, the transmission performance is superior, and the precision is high;

3. The micro motor has wide adaptability, small size, high efficiency, long service life and small bearing force.

Maintenance method of micro gear motor motor:

1. When the micro motor runs continuously for a long time, it is necessary to adopt heat dissipation measures or use a circulating cooling device.

2. Before the micro motor is officially used, it should be run dry for two hours, and then loaded step by step according to the rated load.

3. After the new motor has been running for a certain period of time, the lubricating oil should be replaced. When changing the oil, the inner wall of the motor and the transmission parts should be cleaned.

4. Always check whether the firmware is loose, whether the oil level is high or low, oil temperature and bearing temperature, gears and bearings should be free from abnormal vibration and noise.

5. The surface of the motor should be kept clean, and the vent plug should not be blocked to facilitate heat dissipation.

6. To replace motor accessories, contact the manufacturer and use the size that meets the specifications.